Water sensor 12/24 VOLT
Detects water present in the fuel
Fits into 1/8"NPT port on Cyclone Seperators
offers one additional output to operate a PLC,
additional alarm or solenoid valvebr>
Based on the resistance, the maximum current
that the probe can drive through the fluid,
assuming the fluid is conductive is less
than 0.00004 amps or 0.04 milliamps.
The maximum voltage on the probe is less
than 10 volts. This combination is incapable
of producing a spark. So the system is quite safe.
|
Water sensor 12/24 VOLT ~ Alarm Light & Audible Alert
