Pulse splitter converts the pulse input from a flow meter to give two seperate outputs
There are various pulse output characteristics / manipulations available (See drop-down menu)
7-30V DC Powered
DIN Mount or IP65 Enclosure
Our BF027 Pulse Splitter is designed to convert pulses from meters or other turbine devices and transmit the same pulse via two relay outputs to enable two separate instruments to measure the rate simultaneously. It can be used with either electricity, water or gas meters (NOT ATEX). The BF027 PSO has been designed for applications where a pulse is required to be isolated, re-powered and repeated on two separate outputs. It works with inputs from reed switch signals, Opto coupler, open collector, NAMUR or TTL pulse (up to 25V) with automatic debounce, as well as with high frequency pulses. The speed of pulses can be accommodated from either a very slow to super-fast. Isolated relay outputs can be created by the PSR version when an NPN pulse output from a meter needs to be converted to a single relay isolated output or two.
The standard frequency range is up to 1 kHz and a maximum switching voltage of 280V. We also have an extra fast version for a small extra charge we can reproduce pulses up to 5 kHz with a maximum switching voltage of 60V.
The units are widely used in building management systems (BMS) energy management compliance is made easier if this small unit can be retro-fitted to take pulses from an existing meter into a new monitoring and control system.
The Pulse Splitter is supplied in a compact din rail mounted case as standard and requires 7-30V Dc supply. There are options to take it with the DC supply requirements in a small IP65 sealed wall mounting case or also with a mains powered option when it is supplied in a larger polycarbonate IP65 sealed wall mounted case with a power input requirement of 85-264V AC. with 4 sealing cable glands.
The BF027 Pulse Splitter is characterised by a rugged isolated relay contact outputs which offer more flexibility than polarity sensitive transistor or pulse outputs. It is also characterised by a galvanic isolation up to 1500 Vrms and 3000 volt in oil.
Industrial Applications-
Splitting the signal from meters to data loggers and PLCs.
Water, gas and electricity meters.
Isolating, repowering, repeating and conditioning a signal on 2 separate outputs.
Synectic’s Din Rail version can also be used in road side telemetry Kiosks.
Between devices that require voltage switching like PLCs.
Also used in building management systems.