1" Digital Flow Meter for AdBlue, Chemicals and Water 20-120 L/min
ZoomCreated with Sketch.

1" Digital Flow Meter for AdBlue, Chemicals and Water 20-120 L/min

SKU: FM-200
1" BSP connections
Battery powered LCD display
20-120 L/min 
Maximum 3 bar pressure
Suitable for low viscosity compatible liquids
PPS Body & Rotors
+/-1% Accuracy 
  • $58.13
  • $69.75 inc VAT
Qty:  

Description

  • SKU
    FM-200

FM-200

1" BSP connections
3V Battery powered LCD display
Re-settable Total : 0.00-9999.9
Master Total: 0.00-999999.9
UNITS: L or GAL or PTS or QTS
20-120 L/min 
Maximum 3 bar pressure
Suitable for low viscosity compatible liquids
PPS Body & Rotors
+/-1% Accuracy 
+/- 0.5% Repeatability
 
The Fm-200 is a battery powered digital flow meter, with 1" BSP female connections, and an accuracy of +/-1% and repeatability of +/-0.5%
The meter has a flow range of 20-120L/min and a max pressure rating of 3 bar.
 
It has an accumulated total and resettable total, and user-selectable units (Litres, US Gallons, Pints, or Quarts)
5 digit resettable total (up to 9999.9), 7 digit accumulated total (999999.9), and indication of flow rate.
 

Specification

    FM-200

    1" BSP connections
    3V Battery powered LCD display
    Re-settable Total : 0.00-9999.9
    Master Total: 0.00-999999.9
    UNITS: L , GAL , PTS or QTS
    20-120 L/min 
    Maximum 3 bar pressure
    Suitable for low viscosity compatible liquids
    PPS Body & Rotors
    +/-1% Accuracy 
    +/- 0.5% Repeatability
     

    Operation:

    Key Description

    1. Left CLEAR key：Used to power on the LCD, Clear Re-settable Total

    2. Middle SETUP key：Used to set the coefficient, set the Engineering units, Display Shift between Rate, Tota, Master

    3. Right TOTAL key：Used for total accumulation/class accumulation query, on-site calibration calibration;

     

    Start: Press the SETUP key

    Note: The flow meter LCD will turn off without any operation within 8 minutes.

    ♦ Clear Data: Press CLEAR key when the flow meter is operational, then the current Totals will be deleted.

    ♦ Check Master Total: Press TOTAL key, on the second row of the screen it will show the word TOTAL The number under this is the Mater Total, this can not be reset.

    ♦ Clear the Re-settable Total: Press TOTAL key for 2 seconds, it will show the value whilst flashing, then press the CLEAR button to delete the Re-settable Total

    ♦ The FM-200 flow meter has the  function. “Cal USEr”， The top row shows the current coefficient (The default coefficient is 1000)，Flashing of the coefficient，press shortly“CLEAR”key is ‘add’，press shortly “TOTAL” is less，press shortly“SETUP”key displacement ，press long time“SETUP” to save seating ；