228 Flow Meter - Plastic PVC Tee

SKU: 8228PV
228PV Series Impeller Flow Meter -  PVC Tee
Solvent Weld - BSP - Flanged models 1 1/2" to 4"
Optimum Measuring range 0.3 - 6.1 m/s
Pulse Ouput options
Materials ~ See Options
 
  • Materials of Construction
  • Size
  • Electronics Housing
  • Output Signal
  • O-Ring Material
  • Shaft Material
  • Impeller Material
  • Bearing Material
  • $884.40
  • $1061.28 inc VAT
Qty:  

Description

  • SKU
    8228PV
 
228PV Series Impeller Flow Meter -  PVC Tee
Solvent Weld - BSP - Flanged models
Optimum Measuring range 0.3 - 6.1 m/s
Pulse Ouput options
Materials ~ See Options
 
 
These 228 models feature a modified PVC tee with solvent weld socket end connections(with options including BSP and flanged), and a removable PPS or PVDF flow sensor insert. Sizes include 1-1/2, 2, 3, and 4 inches. The 228PV flow sensors generate a frequency proportional to flow rate, with the option of a user defined scaled pulse output. An internal preamplifier allows the pulse signal to travel up to 2000 feet without further amplification. Power to operate the sensor is provided by the flow monitor or an external DC Supply. The impeller bearing assembly, shaft and O-rings are replaceable in the field without the requirement for calibration.
 
Features :
  • Accuracy: ±1% of full scale
  • Velocity Range:0.15 to 9 mps
  • Repeatability: ±0.3% of full scale
  • Linearity :±0.2% of full scale
  • Connection Type:Schedule 80 PVC Solvent Weld with options for BSP adapters and Flanged adapters
  • Wiring: 20' (6.1 m), 20 AWG two-conductor shielded UL type PTLC cable, rated to 221℉ (105℃), may be extended to 2000' maximum with similar cable
  • Pulse Rate: 3.2 to 200 Hz, 5 ms ±25% width, 9-20 VDC power @ 2 mA maximum; 5V CMOS and LSTTL compatible
  • Media Compatibility:Hot water, chilled water (please verify application is compatible with flow sensor materials of construction,
        check material compatibility resources prior to ordering)
  • Media Temperature Range:Maximum 140℉ (60℃)
  • Maximum Pressure:100 psig (689 kPa) @ 77℉ (25℃) media temperature, decreasing to 40 psig (276 kPa) @ 140℉ (60℃)
  • Materials Of Construction:PVC per ASTM D-2462 and D-2467 virgin unplasticized PVC resin, approved for potable water, PPS housing,
       EPDM o-ring, tungsten shaft, nylon impeller, Pennlon bearings(Standard options)
 
 
 
Weight:

 :228PV1505 1.0 lb (.45 kg)
 :228PV2005 1.0 lb (.45 kg)
 :228PV3005 1.5 lb (.68 kg)
 :228PV4005 2.5 lb (1.1 kg)
 
Approvals:CE

Specification

Downloads