Fluidwell F115-P
Flow Rate, Total, Resettable Total
Quadrature input to detect flow direction
Field Mount IP67 or Panel Mount IP65
Battery or 8-30vDC
The F115 was designed for applications where the direction of flow is an issue.
It requires two pulse signals from the flowmeter which are 90° or 270° degrees out of phase.
If reverse flow occurs the flow rate will be displayed as a negative value, the totalizers will count down, and a switch output will be set.
The pulse and analog outputs do reflect both flow directions.
Features
- Quadrature input to detect the direction of flow.
- Displays positive and negative flow rate to indicate the flow direction.
- Total and accumulated total count up and down accoording to the flow direction.
- Analog and pulse outputs.
- Displays total and flow rate simultaneously.
- Large digit selection for flow rate or total.
- Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
- Total - resettable: seven 17mm (0.67") digits.
- Accumulated total - not resettable: eleven 8mm (0.31") digits.
- Separate engineering units for flow rate and total on the display.
- GRP field mount enclosure.
- Auto backup of settings and running totals in EEPROM memory.
- Ambient temperature: -40°C to +80°C (-40°F to 176°F).