IOG Oval Gear Flow Meter DN6
etering chamber: Stainless steel 316
Oval gears: Stainless steel 316
O-Ring: EPDM (Special for FDA Declaration)
Flow range: 1 - 50 l/Hour above 5 cP
Temp max: 120°C
Connections: 1/8" BSP or NPT Female
Reed switch Potential Free / HE pulse output
See options
FDA Compliant in the default configuration only
Oval Gear flow meters are very accurate and extremely repeatable, making them ideal for batching, mixing and dosing.
See data sheet for HV- High Viscosity model >1000 Centipoise
Advantages:
♦ Measures thin and also highly viscous liquids
♦ Highly Accurate and repeatable measurement
♦ Linear flow measurement
♦ Hi flow models available
♦ Suitable for applications where temperature and density fluctuates
♦ Pulsating flows are tolerated
♦ Unaffected by flow profile
♦ Low pressure drop across meter body
♦ Suitable for hazardous areas (Potential Free Reed Switch and ATEX approved display options
♦ Low cost of ownership / proven design
♦ installation in horizontal or vertical pipework
Oval Gear explanation- As fluid passes through the metering chamber by entering the inlet port, it forces the internal gears to rotate and exits through the outlet port. Each rotation of the gear displaces a given volume of fluid. Controlled clearances between the gears and chamber wall insure minimum leakage. As the gears rotate, a magnet on each end of the gear activates the reed switch and forwards the pulses to the display or raw pulse output.
