- Flow Meters By Type
- Flow Meters by Application
- Chemical Flow Meters
- Compressed Air Flow Meters
- Electricity Flow Meters
- Fuel Flow Meters
- Gas Flow Meters
- Hazardous Area Flow Meters
- Heat Flow Meters
- Hygienic Flow Meters
- Hydraulic Flow Meters
- Low Flow Meters
- Non Invasive Flow Meters
- Oil Flow Meters
- Open Channel Flow Meters
- Steam Flow Meters
- Water Flow Meters
- Displays and Data Logging
- Process Sensors
- Fuel & Oil Transfer
- Environmental Monitoring
- Calibration Services
- Flow Meter Hire
220 Insertion Flow Meter range
Insertion Flow sensor 220
for corrosive and non-corrosive liquids :: Three Types, Brass - Stainless Steel - PVC
for corrosive and non-corrosive liquids :: Three Types, Brass - Stainless Steel - PVC
The Series 200 industrial flow Meetrs feature a six-bladed impeller design with a proprietary, non-magnetic sensing mechanism. The forward swept impeller shape provides higher, more constant torque than four-bladed impeller designs and is less prone to be fouled by water borne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability, even at lower rates. This is more important where the impeller may exposed to metallic or rust particles found in steel or iron pipes.
The signal can travel up to 2000 feet between the flow sensor and the display unit without the need for amplification. All sensors except irrigation versions are supplied with 20 feet of Belden type 9320 two-conductor shielded cable.
FEATURES
- Low impedance 8V DC square wave signal is transmitted with a frequency proportional to the flow rate
- This signal can travel up to 2000 feet between the sensor and the display unit without the need for amplification
- All the sensors are supplied with 20 feet of Belden type 9320 (two-conductor shield) cable
Suitable Medium:
Water, Pharmaceuticals, Chemical media
Water, Pharmaceuticals, Chemical media
Flow Range:
from 12 up to 300000 l/min
from 12 up to 300000 l/min
Temperature Range:
from 0 up to 100 °C
from 0 up to 100 °C
Max Pressure:
from 0 up to 27 bar
Typical Applications:
Water & waste water industry, Chemical Processing, HVAC, General Industry
Water & waste water industry, Chemical Processing, HVAC, General Industry
Sort by:
Recommended
-
220 Series Insertion Flow Meter, Choice of Materials and options
SKU: 8220
200 Series Insertion Flow Meter
Measuring range 0.15 - 9 m/s
Pulse Output
8-35V DC Supply
70cm cable - Standard
Materials ~ See Options$1234.53
$1481.43 inc VAT