220 Insertion Flow Meter range

Insertion Flow sensor 220
for corrosive and non-corrosive liquids :: Three Types, Brass - Stainless Steel - PVC
The Series 200 industrial insertion flow Meters feature a six-bladed impeller design with a proprietary, non-magnetic sensing mechanism. The forward swept impeller shape provides higher, more constant torque than four-bladed impeller designs and is less prone to be fouled by water borne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability, even at lower rates. This is more important where the impeller may exposed to metallic or rust particles found in steel or iron pipes.
The signal can travel up to 2000 feet between the flow sensor and the display unit without the need for amplification. All sensor models except irrigation versions are supplied with 20 feet of Belden type 9320 two-conductor shielded cable.
  • Low impedance 8V DC square wave signal is transmitted with a frequency proportional to the flow rate
  • This signal can travel up to 2000 feet between the sensor and the display unit without the need for amplification
  • All sensors are supplied with 20 feet of Belden type 9320 (two-conductor shield) cable


Suitable Medium:
Water, Pharmaceuticals, Chemical media
Flow Range:
from 12 up to 300000 l/min
Temperature Range:
from 0 up to 100 °C
Max Pressure:
from 0 up to 27 bar
Typical Applications:
Water & waste water industry, Chemical Processing, HVAC, General Industry
Items: 11 of 1
Drop items here to shop
Product has been added