Fluidwell F115-P
Flow Rate, Total, Resettable Total
Quadrature input to detect flow direction
Field Mount IP67 or Panel Mount IP65
Battery or 8-30vDC
Intrinsically Safe, according ATEX and IECEx
The F115 was designed for applications where the direction of flow is an issue.
It requires two pulse signals from the flowmeter which are 90° or 270° degrees out of phase.
If reverse flow occurs the flow rate will be displayed as a negative value, the totalizers will count down, and a switch output will be set.
The pulse and analog outputs do reflect both flow directions.
Features
- Quadrature input to detect the direction of flow.
- Displays positive and negative flow rate to indicate the flow direction.
- Total and accumulated total count up and down accoording to the flow direction.
- Analog and pulse outputs.
- Displays total and flow rate simultaneously.
- Large digit selection for flow rate or total.
- Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
- Total - resettable: seven 17mm (0.67") digits.
- Accumulated total - not resettable: eleven 8mm (0.31") digits.
- Separate engineering units for flow rate and total on the display.
- GRP field mount enclosure.
- Auto backup of settings and running totals in EEPROM memory.
- Ambient temperature: -40°C to +80°C (-40°F to 176°F).
