Hedland EZ-View Flow Switch for Oil : 1/2" BSP

SKU: H627-7
Hedland EZ-View VA Flow Switch
For Oil Fluids
Polysulfone Plastic Construction
Pressure up to 22.4 Bar / 325PSI
1/2" BSPT Female, Swivel brass Connections
Flow ranges from 2 - 60 LPM
Calibrated on 0.876 SG
 
  • Switch Type
  • Flow Range
  • £126.14
  • £151.37 inc VAT
Qty:  

Description

  • SKU
    H627-7
 
HP627
 
Hedland EZ-View VA Flow Switch
For Oil Fluids
Polysulfone Plastic Construction
Pressure up to 22.4 Bar / 325PSI
1/2" BSPT Female, Swivel brass Connections
Flow ranges from 2 - 60 LPM
Calibrated on 0.876 SG
 
Also available with NPT connections (Please contact for more details)
 
The Hedland EZ-View Flow Meter is a variable area (rotameter) instrument. A precision machined, sharp-edged Orifice is located within the piston assembly and forms an annular opening with the contoured metering cone. Flow through the meter creates a pressure differential across the sharp-edged oriface, moving the piston against the spring. The piston moves precisely, in direct proportion to the rate of flow. A calibrated spring opposes flow in the forward direction. This spring decreases viscosity sensitivity and allows the flow meter to be used in any position, including inverted.The indicated flow rate is measured by viewing the red flow indicator line on the piston relative to the precalibrated numerical scale, mounted on the outer surface of the transparent flow meter body.
 
Features:
  • Install in any position
  • No electronics needed to obtain a reading
  • No flow straighteners or special piping required
  • Relatively insensitive to shock and vibration
  • Temperature up to 121 °C
  • Pressure up to 22.4 bar max
  • Accuracy ±5% full scale
  • Repeatability +/- 1%

  

 
Application Examples

  • Hydraulic Power Units
  • Gear Boxes
  • Test Benches
  • Bearing Lubrication Flow Monitoring
  • Hydraulic Linear Positioning
  • Mineral Oils
  • Hydraulic Tools and Components
  • Power Steering Analyzing
  • Transmission Fluid Analyzing
  • Mobile Construction Equipment
  • Petrol, Kerosene, Methanol Flow Monitoring 

Specification

     
    Hedland EZ-View VA Flow Switch
    For Oil Fluids
    Polysulfone Plastic Construction
    Pressure up to 22.4 Bar / 325PSI
    1/2" BSPT Female, Swivel brass Connections
    Flow ranges from 2 - 60 LPM
    Calibrated on 0.876 SG

     

    Features:
    • Install in any position
    • No electronics needed to obtain a reading
    • No flow straighteners or special piping required
    • Relatively insensitive to shock and vibration
    • Temperature up to 121 °C
    • Pressure up to 22.4 bar max
    • Accuracy ±5% full scale
    • Repeatability +/- 1%
    • Calibrated for .876 S.G.
     
     
    Flow-Alert Flow Switch
     
    Options and Specifications:
    AC and DC Latching Switches
    Latches when magnet inside flow meter passes by the module aand remains latched on until pagent passes in other directions or power is interupted. Adjustable across full range of meter.
    • Latching relay circuit housed in a sealed polypropylene enclosure
    • Normally open dry relay contact
    • Controls alarms, warning lights, relays
    • Interface to PLC
     
    Reed Switch
     
    Switch changes state when magnet comes into proximity of the module. Set point is adjustable across full range of the meter. 
    • Housed in a seales polypropylene enclosure
    • Does not latch like AC and DC switches
     
     

Downloads