Hedland MR Flow Transmitter for Oil and Petroleum: 1/4" BSP, Aluminium

SKU: H202A
Hedland MR Flow Transmitter
For Oil and Petroleum Fluids
Digital flow rate and totaliser
Aluminium Construction
1/4" BSP Connections
Flow ranges from 0.5-7.5 L/min
Analog Outputs
In-field fluid compensation
 
  • Flow Range
  • $1135.90
  • $1363.08 inc VAT
Qty:  

Description

  • Weight
    1.9300 kg
  • SKU
    H202A
 
H202A
 
Hedland MR Flow Transmitter
For Oil and Petroleum Fluids
Digital flow rate and totaliser
Aluminium Construction
1/4" BSP Connections
Flow ranges from 0.5-7.5 L/min
Analog Outputs
In-field fluid compensation
 
The MR Transmitter uses the Hedland VA Meter to display digitally the rate of flow and total flow volume.
It allows the user to select the enginnering units 
Allows fluid compensation for specific gravity and viscosity

Install in any position
No flow straighteners or special piping required
Temperature up to 116 °C
Pressure up to 241 bar max
Accuracy ±7% full scale
  
Available in Brass and Stainless Steel and with NPT or SAE connections (Please contact for more details)

Specification

     
    Hedland MR Flow Transmitter
    For Oil and Petroleum Fluids
    Digital flow rate and totaliser
    Aluminium Construction
    1/4" BSP Connections
    Flow ranges from 0.5-7.5 L/min
    Analog Outputs
    In-field fluid compensation
     
     
    MR Flow Transmitter
    • Full line of multi-functional remote flow indicators and transmitters
    • Operate as part of a totally integrated electronic process control/data acquisition system
    • Non-contact sensor electronics
    • Electronic signal conditioning circuit
    • Digital flow rate and total flow indication
    • Proportional analog output
    • In-field compensation for:
    Specific gravity of all fluids
    Viscosity
     
    Materials:
    2024 - T351 Anodized aluminum body, piston and cone
    T303 Stainless body, 2024 - T351 Anodized aluminum piston and cone
    (Oil, PE, WBF, & Air meters)
    T303 Stainless body, C360 Brass piston and cone (Water meters)
     
     
    Enclosure:
    Material: Anodized and epoxy powder-coated aluminum with
    polycarbonate lens
    Seals: Silicone gaskets between enclosure and lens
    Viton® O-rings between enclosure and flow
    meter body
    Connection: 4-pin (Protection Class IP65) standard, see Figure 2
    Other connections available - consult factory for details
    Fasteners: T303 SS
    Rating: NEMA 12 & 13 (IP 52/54)
     
    Electrical Specifications:
    • Power Requirement: 0-5 VDC Output: 10-30 VDC @ 0.75W maximum
    • 0-10 VDC Output: 12-30 VDC @ 0.75W maximum
    • 4-20 mA Output: loop-powered, 30 VDC maximum
    • Power Consumption: 25 mA maximum
    • Analog Outputs: 0-5 VDC and 0-10 VDC into 10,000 Ohms minimum
    • 4-20 mA into 1000 Ohms maximum
    • Circuit Protection: Reverse polarity and current limiting
    • Transmission Distance: 4-20 mA limited by cable resistance
    • 0-5 VDC and 0-10 VDC 1000 feet (300 m) maximum
    • Isolation: Inherently isolated from the piping system
    • Display: Fixed or toggle modes of operation for rate and totalizer display
    • 8 digit, 0.70" high numeric display for rate and total
    • 8 digit, 0.35" high alphanumeric display for units and setup

Downloads