IGTM Mechanical Gas Turbine Meter 100mm
The IGTM-WT is an industrial gas turbine meter for accurate volume and flow measurement. The gas meter incorporates an 8-digit mechanical counter increments with gas passing through the meter. A standard low frequency pulser provides pulses per m³ (1R1) and can be connected to an electronic volume converter (EVC) for pressure and temperature conversion.
Features:
- Flow Range 10 - 100 m3/hr
- 8 Digit Mechanical Counter
- Lightweight Anodized Aluminium Body, Wafer Design
- Accuracy +/- 1.5% for 0.2 Qmax to Qmax ,
- +/- 3% for Qmin to 0.2 Qmax
- Repeatability +/- 0.1% or better,
- Suitable for all non Aggressive Gases including Natural Gas and LPG,
- Short straight pipe run required 3DN Upstream and 2DN Downstream,
- IP65 Protection,
- Pulse Output Option
Details
- With permanently lubricated ball bearings
| - DN [mm] (inch) |
DN 50 (2) |
| - Size |
G 65 |
| - Qmax |
100 m/h |
| - Qmin |
10 m/h |
| - Outer diameter |
102 mm |
| - Height H |
176 mm |
| - Length L |
120 mm |
| - Weight |
3,6 kg netto |
| - K-factor |
1R1 Reed |
10 pulses/m |
| - K-factor |
HF3 NAMUR |
ca. 4400 pulses/m 2) |
| - Frequency |
HF3 |
ca. 80 Hz |
2) The applicable values are given on the main plate and in the test certificate of the meter.
fig. blown apart image
