IOG Oval Gear Flow Meter DN25

SKU: OG-010

Metering chamber: Stainless steel 316
Oval gears: Stainless steel 316
O-Ring: EPDM (Special for FDA approval)
Flow range: 2.3 - 68 l/min above 5 cP
Temp max: 120°C
Connections: 1” Tri Clamp (16 Bar W.P)
Reed switch pulse output (ATEX Compliant)
See options

  • Body and Rotor Material
  • High Viscosity Model
  • Connections
  • Seals
  • Meter Mounted Transmitter
  • Meter Mounted Flow Display
  • Remote Mounted Flow Display
  • Certification
  • Remote Cable Length
  • $2494.83
  • $2993.79 inc VAT
Qty:  

Description

  • SKU
    OG-010

IOG Oval Gear Flow Meter DN25

Metering chamber: Stainless steel 316
Oval gears: Stainless steel 316 
O-Ring: EPDM (Special for FDA approval)
Flow range: 2.3 - 68 l/min above 5 cP 
Temp max: 120°C
Connections: 1” Tri Clamp (16 Bar W.P)
Reed switch pulse output (ATEX Compliant)- See options for displays

FDA Compliant in the default configuration only (Standar or HV Rotors)

Oval Gear flow meters are very accurate and extremely repeatable, making them ideal for batching, mixing and dosing.
See options for HV- High Viscosity model >1000 Centipoise

Advantages:

♦ Measures thin and also highly viscous liquids
♦ Highly Accurate and repeatable measurement
♦ Linear flow measurement
♦ Low flow models available
♦ Suitable for applications where temperature and density fluctuates
♦ Pulsating flows are tolerated
♦ Unaffected by flow profile
♦ Low pressure drop across meter body
♦ Suitable for hazardous areas
♦ Low cost of ownership / proven design
♦ installation in horizontal or vertical pipework

Oval Gear explanation- As fluid passes through the metering chamber by entering the inlet port, it forces the internal gears to rotate and exits through the outlet port. Each rotation of the gear displaces a given volume of fluid. Controlled clearances between the gears and chamber wall insure minimum leakage. As the gears rotate, a magnet on each end of the gear activates the reed switch and forwards the pulses to the display or raw pulse output.

Image result for oval gear flow meter

Specification

    IOG Oval Gear Flow Meter DN25

    Metering chamber: Stainless steel 316
    Oval gears: Stainless steel 316 
    O-Ring: EPDM (Special for FDA approval)
    Flow range: 2.3 - 68 l/min above 5 cP 
    Temp max: 120°C
    Connections: 1” Tri Clamp (16 Bar W.P)
    Reed switch pulse output (ATEX Compliant)- See options for displays

Related Products

D030-P DIN panel Batch Controller, pulse input, 1-stage relay output

F030-P ATEX Batch Controller, pulse input, 1 transistor output

F030-P Batch Controller, pulse input, 1-stage relay output

F130-P Batch Controller, Pulse Input 2-Stage Outputs, Batt and DC Power, ATEX

F130-P Batch Controller, Pulse Input 2-Stage Relay Outputs, 115-230V AC

Field mount LCD Flow display 12-36V DC Powered :: Pulse Input

Fluidwell F110 Flow Rate Indicator/Totaliser with Outputs|Intrinsically Safe, ATEX, EEx ia

Fluidwell F110-A Flow Rate Indicator/Totaliser with Outputs

Fluidwell F110-A Flow Rate Indicator/Totaliser with Outputs|Intrinsically Safe, ATEX, EEx ia

Fluidwell F110-P Flow Rate Indicator/Totaliser with Outputs

Fluidwell N410 DIN panel mount batch controller with numerical keypad

Fluidwell N413 DIN panel mount batch controller with printer driver

SUPERtrol-1LE (ST1LE) Batch Control, Rate & Total

Downloads