Tigerloop TL61101-C Heating Oil De-aerator / Deaerator

SKU: TL61101-C
Tigerloop Combi external Deaerator
TL61101-C (Standard Model)
Max Flow 230 litre/Hr
8 litre/hr Oil de-aeration capacity
Comes with exchangeable 15 micron filter
1/4" BSP connections 
  • Model
  • $106.88
  • $128.25 inc VAT


  • Weight
    0.3000 kg
  • SKU
Tigerloop Combi external Deaerator
Max Flow 230 litre/Hr
8 litre/hr Oil de-aeration capacity
Comes with exchangeable 15 micron filter
1/4" BSP connections 

A Tigerloop makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost effectiveness and reliability.

Effective de-aeration
In an oil heating system using a Tigerloop, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.

Own two-pipe circulation
An oil pump delivers the same amount of oil irrespective of what is actually needed for combustion. In the case of a normal domestic burner, only 5 % of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank. With a Tigerloop automatic oil de-aerator no oil needs to be transported back to the tank. The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason only the amount of oil to be burned in combustion is sucked from the oil tank.

Preheated oil
A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.

Minimum of dirt/sludge
The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot build up is reduced and filter life is extended.


  • Max Nozzle Capacity – 110lph
  • Max Return Oil Pumped In To The Tigerloop – 120lph
  • Max Flow – 230lph
  • Max De-Aerating Capacity – 8lph
  • Max Operating Temperature – 60°c
  • Max / Min Operating Pressure In The Feed Line – +0.5 to -0.6 Bar






    Nozzle Capacity

    110 lph

    Return Flow Rate

    120 lph

    Max Flow Rate

    230 lph

    Max Deaerating Capacity

    8 lph

    Max Operating Temp


    Max Pressure

    -0.5 to +0.6 Bar

    Filter (included)

    15 micron disposible element

    Control Valve


    Vacuum Gauge