Tigerloop TON110I Heating Oil De-aerator / Deaerator

SKU: TON110I
Tigerloop external Oil de-aerator
1/4" BSP connections
0.6 litre/hr de-aeration capacity


  • Fitting Kit
  • £71.50
  • £85.80 inc VAT
Qty:  

Description

  • Weight
    0.3000 kg
  • SKU
    TON110I
 
Tigerloop external Oil de-aerator

1/4" BSP connections
0.6 litre/hr de-aeration capacity
 
In an oil heating system using a Tigerloop®, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.
The improved original, third generation automatic oil de-aerator. The innovation presented by Tigerholm in 1971 has for over 30 years made oil heating installations more efficient, safe and environmentally friendly. To be combined with a separate oil filter.

All systems benefit from Tigerloop's unique ability to condition the oil prior to burning.
Whether it's air elimination, nozzle coking problems, vacuum reduction, oil preheating,
or just the elimination of that potentially leaky return line.
Suction lifts up to 3.6m can be obtained when using the new Tigerloop system.
As this unit vents vapour to atmosphere it is required for external installation.
 
Max. Nozzle Capacity: 110L/h
Max. oil flow: 230L/h
Max. Operating temp: 60C
Max. Operating Pressure: +0.5bar

Specification

    Tigerloop, The Original De-Aerator 

    For external mounting only. This device is not permitted for indoor installation as it vents contaminated air into its surrounding environment, this could create an explosion or health hazards in confined spaces and therefore must be fitted on the outside wall of any premises. For situations where the boiler is not mounted to the external wall, use an internal mounting de-aerator, such as the Tigerloop BIO or the GOK GS2000 

    A Tigerloop makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost effectiveness and reliability.

    Effective de-aeration
    In an oil heating system using a Tigerloop, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.

    On two-pipe circulation
    An oil pump delivers the same amount of oil irrespective of what is actually needed for combustion. In the case of a normal domestic burner, only 5 % of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank. With a Tigerloop automatic oil de-aerator no oil needs to be transported back to the tank. The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason only the amount of oil to be burned in combustion is sucked from the oil tank.

    Preheated oil
    A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.

    Minimum of dirt/sludge
    The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot build up is reduced and filter life is extended.

Downloads