Jul 19, 2017GWR200 Flow Sensor for Accurate Level MeasurementBell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement....Read more
Jul 10, 2017Gespasa BDP Pumps - ATEX CertifiedThe Gespasa BDP high-flow, explosion proof range of vane pumps are self-priming, positive displacement, and continuously rated. The BDP pumps in the collection are suitable for use with diesel, petrol...Read more
Jul 3, 2017M1000 Mag Flow Meter ApplicationBell Flow Systems were recently approach by a customer who was having a problem with their existing meter installation. The customer had previously installed a geared flow meter for their application....Read more
Bell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement.
The Gespasa BDP high-flow, explosion proof range of vane pumps are self-priming, positive displacement, and continuously rated. The BDP pumps in the collection are suitable for use with diesel, petrol, kerosene and other clean, non-corrosive liquids.
Bell Flow Systems were recently approach by a customer who was having a problem with their existing meter installation. The customer had previously installed a geared flow meter for their application.
Last month two of Bell Flow’s employees went to visit our supplier Gespasa in Spain for some product training. Gespasa’s factory is located in Balaguer (Lleida) in Spain, about an hour and a half from Barcelona. They manufacture fuel pumps and flow meters for diesel, petrol, oil, and adblue.
Introducing the new iSonic 4000, a versatile ultrasonic flow meter for open channels and partially filled pipes as well as measuring volumetric contents of liquids in tanks. Suitable for clean water and waste water applications the iSonic 4000 can be used in combination with weirs or flumes.
The M5000 IP68plus is a battery operated electromagnetic flow meter designed for water metering and management. It is designed to meet the highest demands of water metering applications assuring the user of reliable and accurate measurements with low maintenance.
AdBlue is becoming increasingly more commonplace. Sometimes known as Urea, which makes up of 32.5% AdBlue, it is used to reduce the harmful NOx emissions produced by diesel vehicles.
Bell Flow Systems have recently been approached for a grain driers application in Saudi Arabia. The customer needed a robust meter, with a local display to show total usage only, which would withstand the ambient temperature and require minimal maintenance.
Bell Flow Systems has recently been approached by an Italian helicopter company for help with engine fuel consumption on their test rigs. Having discussed the application our recommendation was to use the Macnaught oval gear flow meters.
Bell flow systems were recently approached about a sea water pumping application for an offshore oil rig. The customer required a highly accurate meter to fit onto an existing 3” line.
Introducing the RCT1000 Coriolis mass flow meter, the latest addition to Badger Meter USA’s growing product portfolio. RCT1000 meters are especially suited to the precise measurement of high viscosity fluids, aggressive media and contaminated fluids as well as high density gases.
As part of an ongoing collaboration with an aviation fuel management company based at Heathrow airport, Bell Flow Systems were asked to supply an ATEX rated, accurate and reliable monitoring system with a live digital flow rate readout.
Bell Flow Systems are now proud to introduce the new Leveline water level logger to their ground water measurement range. The Leveline sensor is a cost effective solution for those looking to monitor water level applications in ground water, estuarine and surface water applications.
Weird Beard Brew Company, a London based brewery who specialise in hand-crafted beers came to Bell Flow looking for a flow meter to use in their brewery. The requirement was for a high accuracy meter, with minimal wear and tear to ensure longevity and minimal maintenance, allowing more time to make
Now available from Bell Flow Systems, the MacR6 is a user friendly, low cost solution for monitoring water consumption and pressure within water distribution networks and many other flow metering applications.
The demand for wireless communication in the field of sensors and measurement devices is forever increasing, with technology development operating nonstop. The problem most consumers currently face however is that products which claim to be wireless, commonly are not truly wireless.
Bell Flow Systems were recently asked to provide a meter suitable for accurately measuring and recording the flow of sea water being pumped across a beach at Hinkley point.
Bell Flow Systems were recently approached by a company who specialize in the set up and maintenance of aquatic exhibits in zoos around the UK. The company required a flexible, portable metering option, which would allow their engineers to measure the flow rate in a variety of pipe sizes.
Effective fuel management is essential to any organisation wanting to successfully monitor their fuel levels and prevent fuel thefts occurring especially in third world countries. When completed properly, it can make a vitally important contribution to the profitability of such organisations.
A number of Eijkelkamp Diver water level loggers have been used in a ground water monitoring application in Romania. For this project, research is conducted into the feasibility of underground storage for water during periods of severe drought or heavy rainfall.
After Forty years of manufacturing in Sydney- Australia by Macnaught Pty , a decision to stop production of M-Series mechanical display flow meters in favour of digital models was taken last year. This has now been reversed for 2017
Measuring flow utilising the leading MEMS technology, MF5700 thermal mass flow meters from Siargo are a cost-effective choice for gas flow monitoring, measurement and control in general purpose flow applications.
More than 1,500 ultrasonic cooling energy meters were installed in the 55-story Juma Al Majid Tower which is nearing completion in the centre of Dubai. Both luxury apartments and commercial spaces will be created within the tower block.
Introducing a comprehensive selection of water quality instruments from Electro Chemical Devices (ECD) including the popular T80 Transmitters and the new S80 Sensors, now available from Bell Flow Systems.
Badger Meter Vision series of turbine flow meters have been examined, tested and found to comply with the requirements of The Water Regulations Advisory Scheme, also known as WRAS.
The new Qalcosonic heat meter is MID Class 2 Approved for RHI and billing purposes for both heating and cooling applications. Meter sizes from DN15 to DN50 with BSP threaded and flanged connections, Qp values range from 0.6 to 15 m3/hr with R100 dynamic range as standard
Hedland variable area flow meters give a clearly visible indication of system flow with a choice of optional electronic outputs. The traditional variable area design has been brought up-to-date by utilising a sharp edged orifice and spring loaded float to ensure operation in any orientation.
The FloClean Sanitary turbine flow meter was designed for use in the food, beverage, chemical and pharmaceutical industries. Models incorporate the most-up-to-date polishing technology and all materials comply with the FDA requirements.
Introducing the new cost-effective TD-Diver from Van Essen. The TD-Diver replaces the Mini-Diver with a new improved design. The enclosure has been redesigned to optimize the protection of the pressure sensor and electronics and by making the TD-Diver heavier than its predecessor.
The compact Basic EX 1 mobil is designed for portable use and fittings in manholes within explosion-hazardous surroundings, offering time, volume, event and flow proportional sampling programmes.
Another renowned supplier added to our growing portfolio is Itron. We are proud to be supplying an extensive range of water meters, gas meters and heat meters from Itron.
Introducing the Loop Powered Ultrasonic Level Sensor from APG. The LPU-2428 sensor is designed for environmental monitoring, water and wastewater control, and liquid tank measurement applications. They are also suited to other industrial and process control applications.
Recently added to Bell Flow System’s enhanced portfolio of environmental products is the Diver Water Level Loggers. Diver products are suitable for monitoring groundwater and surface water in various types of applications. Each instrument is designed to perform well in various types of water.
The AquaPlus probe is a portable combined optical dissolved oxygen, electrical conductivity and temperature sensor from Aquaread. Suitable for testing groundwater, surface water and waste water, the IP68 rated AquaPlus is constructed from rugged materials to withstand harsh environmental conditions.
The Compact Fixed AV-Flow Meter from Mainstream Measurements uses the area-velocity method giving a continuous or time sample measurement of fluid flow. The high performance meter is designed for users wanting to measure water velocity
The CTD-Diver instrument available from Bell Flow Systems offers a way of measuring and registering groundwater level, groundwater temperature and groundwater conductivity with a single instrument, all by using a device that fits into a one-inch probe!
The new generation of the ORI Basic Solid® sampler is now available with a new enclosure concept which has been developed to make operation more efficient and also to ensure that maintenance and cleaning activities are much easier.
Bell Flow Systems were contracted to supply a dispensing management system to be used with water. The application called for a solution to allow registered users only, to dispense water from a large storage tank for window washing purposes
We are pleased to announce the launch of our new and improved website. We have updated our site by adding a new improved chat function, new product categories, integrated blog, newsletter archive section, latest news and technical support page.
Bell Flow Systems will be exhibiting at WWEM in November this year. The event is designed for companies and individuals who are involved in the water, wastewater and environmental industry.
AquaLink II is a telemetry device with a built in data logger that is designed to allow the user to access data remotely on the web. This cost effective monitoring system benefits from being battery powered with a lifetime of 6 years.
Bell Flow Systems were recently approached by a customer who operated five boreholes and was limited by license to the volume of water he could draw from each borehole on a daily basis.
The TFX Ultra is a compact ultrasonic flow meter benefits from a bi-directional measuring range that ensures reliable readings at very low and high flow rates.
Bell Flow Systems were recently asked by a well regarded UK train operating company to supply non-invasive flow meter equipment that could easily be installed to carry out short term tests of oil flows on a number of trains in their fleet.
Twelve BFU Ultrasonic Heat Flow meters from Bell flow Systems are being used in a district heating study being undertaken as part of a Southampton University PHD Thesis.
The latest Macnaught MX-Series Ex range of oval gear flow meters have been tested and approved by FM, DEKRA and SIRA for use in ATEX Category 2 Zone 1 applications
This new range is available from Bell Flow Systems in sizes ranging from DN15 to DN100 and is fully compliant with the requirements of both Domestic and Non-domestic RHI schemes.
Based in Edmonton, The Gym required the measurement of heat energy consumption as part of the Renewable Heat Incentive (RHI) scheme, along with the monitoring of cold and hot water services.
Last week Macnaught launched two new pulse modules- the DIN Compact Pulser Module and the Industrial Pulse Cap, to compliment their MX range of oval gear flow meters.
As strong advocates of training to boost our product expertise, our team spent two days learning about the technical aspects and capabilities of the AquaLink unit, it’s programming and how to interpret collected data via the cloud based software.
